$150.00

C6Z06 exhaust bypass switch allows you to change exhaust note with the flip of a switch.

$59.95

Low temp thermostat increases performance and helps your engine run cooler.

$169.95

The new MTI Racing belt tensioner is the BEST manual tensioner on the market.

$3 695.00

The ultimate in braking for the ZO6 ! As used on the Southern Stingray.

$771.00

Brey-Krause R-1115 Harness Mount Bar for C6 and C6 Z06 Corvette coupe or fixed roof.

$149.00

Goodridge 12291 stainless steel brake line kit for Z06 Corvette. Great brake upgrade!

$1 990.00

Serious racers need solid spherical control arm bearings.. The Pfadt kit replaces all 18 of the control arm bushings with mono-ball joints to eliminate friction and deflection.

$489.00

Callaway "Honker" systems have the highest airflow with the lowest restrictions for faster lap times and ETA. Offers 34% more airflow and retains all OEM sensors and actuators. Also comes with K&N filter.

$995.00

Front Chin Spoiler for C6-Z06 is made from pure Carbon Fiber. A great way to dress up your C6-ZO6 and provide high-speed stability. Extends about 2" forward and 1" lower than factory valance, attaches using factory body clips.

$1 245.00

These hoods which are part of our new Supercharged LS7 Engine Upgrade. Can now be purchased as a separate add-on item for your C6 Coupe or C6-ZO6! This Extractor hood is available in either Clear Coated Carbon Fiber or Paintable Composite.

$1 295.00

Made from pure Carbon Fiber and developed in the wind tunnel for proven results. Can be used for both the street and track. Spoiler is 4" tall and uses the factory mounting location. Carbon Fiber piece comes in a clear coated finish and fiberglass piece i

$1 895.00

Front Splitter for C6-Z06 Models Only is made from pure Carbon Fiber and developed in the wind tunnel for proven results. Can be used for both the street and track. Extends about 1" lower and 2" forward than factory valance. Flat belly section covers 25"

$225.00

Cloyes Timing Chain specifically for LS7 and LS3. Fits 2010 Camaro and LS3 Corvette.

$99.99

This flexible crossover line replaces the hard factory tubing conviently located on the front of the vehicle for easy access. Not only is it functional, but it looks trick too!

$429.00

XR1 combines a very aggressive initial bite/attack and high sustained torque levels with good modulation/threshold control and release characteristics to deliver unparalleled decelerations rates across a broad range of operating conditions

$329.00

XR1 combines a very aggressive initial bite/attack and high sustained torque levels with good modulation/threshold control and release characteristics to deliver unparalleled decelerations rates across a broad range of operating conditions

$429.00

XR2 features a strong initial bite with a controlled transition to a medium-high rising torque profile. Particularly well-suited to chassis/tire combinations or surface conditions which do not respond well to high initial brake energy (or where the XR1 ma

$329.00

XR2 features a strong initial bite with a controlled transition to a medium-high rising torque profile. Particularly well-suited to chassis/tire combinations or surface conditions which do not respond well to high initial brake energy (or where the XR1 ma

$269.00

The Carbotech Bobcat 1521™ is our high performance street compound that is our most successful compound.

$311.00

When Carbotech unleashed the XP10™ to the general public, and it was an instant success, gathering multiple regional, divisional, and national championships.

$327.00

The latest iteration of the highly successful XP™ series of compounds with an extremely high initial bite, torque and fade resistance than compound XP10

$329.00

$795.00

$995.00

Rocker Covers fit all LS engines and uses LS7 coil bracket. For the ultimate look use MSD coil packs.

$850.00

Upgrading you corvettes radiator system is the best way to protect you engine and transmission from the damaging heat that robs your performance and life of your drivetrain.

$185.00

At a full 1/4" thick 6061-T6 aluminum, this plate is twice as thick as your stock OEM Tunnel Plate

$997.00

Testing on a 500ci LSX engine with LS7 heads and a Big Mouth 102mm Throttle Body™ this manifold produced gains of 26 RWHP over the stock intake.

Call for Pricing

The ZX3-R is a 10 spoke evolutionary design. Each spoke is tapered 10 degrees and extra machining is used to reduce weight even further than the original SX3-R design.

$149.00

PRO 5 Point Pull-Down waist * FIA Approved *

$325.00

The Hardbar seat rail kit is the very best seat rail kit available for mounting a race type seat

$1 825.00
$1 740.00
You Save: $85.00

C6-Z06; 1-7/8" x 3" headers with Catted X-pipe 3" x 3". Gives improved HP and Torque throughout the power curve. ARH part# Z0678wc

$199.00

The world's smallest, wireless on-board video camera. They make easy in-car videos a reality. Use it to video your cruising, racing, or just to document the crazy things you do on YouTube.

$199.00

Let your superchargers and turbos breath cooler air with this new intercooler pump from MTI Racing

$1 795.00

MTI Racing is now offering the new "LG SUPER PRO" headers system for the ZO6. With the highest quality merge collector that helps the top end power curve and lifts the low end torque. The LG SUPER PRO 1 7/8" headers system is constructed using 304 stainle

$329.95

If you are looking for a better feel or just a better look a Momo steering wheel will conquer both.

$4 895.00

For the corvette owner who wants the absolute best performance on the track; a set of Moton coilovers is what you need.

$789.00

The MSD coils are great for cammed or supercharged applications. Big benefits are smoothing out the lower rpms, and increasing the throttle response off-idle.

$2 495.00

Looking for a custom shock set up? Look no further.

$100.00

Mild2Wild exhaust bypass switch allows you to run your bi-modal exhaust open or quiet, at the touch of a button.

$119.00

These wires are custom made for MTI Racing by the supplier to IRL and Daytona Prototype cars. Perfect for street, show or track.

$3 995.00

To get the best ride quality for your corvette on the street or on the track a set of Penske coilovers are the best for both worlds.

$650.00

For C6 ZO6 owners who want to protect their investment a MTI ported oil pump is the way to make sure your engine is safe and ready for whatever you throw at it.

$600.00

Here is our famous MTI Racing "BIG RED" sway bars. These will increase you handling instantly!

$247.00

These versatile lightweight aluminum tanks from MTI Racing are suitable for any number of applications including; remote oil/water supply and coolant overflow/ recovery

$250.00

These Engine mounts reduce the massive powertrain shake (sometimes mistaken as wheel hop) that is common in the C6.

$1 025.00

The Pfadt "Competition" sway bars are the stiffest bars on the planet, designed for serious track day performance. These are for drivers who want to go big or go home.

$2 000.00

The Pfadt Carbon Fiber drive shaft assembly weighs only 4.28 pounds! Saves almost 1/2 the weight of the factory parts. Comes with full Titanium hardware.

$219.95

C5/C6 Corvette Polyurethane Driveline Couplers

$39.00

MTI Racing Cue Ball Shift Knob fits the threaded Six Shooter Shifters fits the Six Shooter shifter for a 2010+ Camaro. The balls are 2" in diameter with 6-speed shift pattern.

$65.00

Delrin is a high-quality composite material that is ultra strong and can be machined to a precise tolerances. The Delrin material also resists heat, so the knob won't get hot in your hand. The MTI Racing Blackhawk shift knob is machined just like the grip

$194.00

In designing this shifter we started from scratch, re-examining the material selection for every component and how each piece interfaces in the assembly.

$200.00

A set of adjustable end links will let you (zero) out your sway bars to maximize your corvettes suspension capabilities.

$22.00

Show off your enthusiam with this great looking Corvette T Shirt. Comes in black 100% cotton with MTI Racing logo on front with a pair of awesome Corvettes on the back. The white Corvette is our World Challenge C5 Racecar that is still seen on racetracks

$40.00

fitting goes in place of your original oil filler cap for a trick street look and for race applications. It is designed to fit a -10AN fitting.

$79.99

This breather is equipped with a billet aluminum base with an o-ring for proper sealing as well as a chrome top piece with a fabric element. It spins on to the valve cover just like your stock oil filler cap.

$8.95

From the street to the track everyone knows the importance of stopping.

$1 950.00
$1 755.00
You Save: $195.00

C6ZO6 Corvette Headers with 1-7/8" dia. 31" long primaries with "D" shaped port matched flange and 3" slip fit collectors