$79.95

Stop letting heat rob your vehicle of its performance.

$169.95

The new MTI Racing belt tensioner is the BEST manual tensioner on the market.

$459.00

MTI Racing Complete Valvespring and Installation kit contains all you need to finish your build with premium components.

$449.00

Brey-Krause R-1115 Harness Mount Bar for 1997-2004 C5 Corvette coupe or fixed roof.

$129.00

This upgrade is recommended for any street Corvette that wants to have a better brake feel with an added safety benefit.

$99.95

This kit contains all the necessary hardware to lower the front and rear of you C5 up to 2 inches for a more aggressive look.

$489.00

Callaway "Honker" systems have the highest airflow with the lowest restrictions for faster lap times and ETA. Offers 26% more airflow and retains all OEM sensors and actuators. Also comes with K&N filter.

$628.00

H - Beam Rods. Set of 8. Designed and Produced with Engineering and Finishing advancements, CompStar connecting rods have what it takes to make your engine build trouble free and your finished product reliable.

$99.99

This flexible crossover line replaces the hard factory tubing conviently located on the front of the vehicle for easy access. Not only is it functional, but it looks trick too!

$329.00

$795.00

$995.00

Rocker Covers fit all LS engines and uses LS7 coil bracket. For the ultimate look use MSD coil packs.

$1 157.00

DragonSlayer crankshafts are made in the U.S.A. for American Racers.

$185.00

At a full 1/4" thick 6061-T6 aluminum, this plate is twice as thick as your stock OEM Tunnel Plate

$399.00

New 92mm throttle body design incorporates major upgrades, including redesigned linkage for smoother operation and improved throttle response

$1 187.00

The new LSX™ 92mm Intake Manifold by FAST™ provides a 20+ horsepower increase over the factory LS1 intake with no loss of drivability or low rpm torque

Call for Pricing

The ZX3-R is a 10 spoke evolutionary design. Each spoke is tapered 10 degrees and extra machining is used to reduce weight even further than the original SX3-R design.

$149.00

PRO 5 Point Pull-Down waist * FIA Approved *

$325.00

The Hardbar seat rail kit is the very best seat rail kit available for mounting a race type seat

$1 795.00

C5; 1-3/4" x 3" headers with Catted X-pipe 3" x 2-1/2". Gives improved HP and Torque throughout the power curve. ARH part# C5L34cw

$2 150.00

For the ultimate street LS1/LS6 aluminum cylinder head, AFR's 205cc emission legal head are your only choice.

$2 295.00

For the maximum street/strip LS1/LS6 aluminum cylinder head AFR's all new 225cc, emission-legal head E/O #D250-4 is the best choice.

$2 795.00

The ultimate street / strip LS1/ LS6 cylinder head, MTI RACINGs 240cc for 4" Bore or larger. Fully CNC Ported and as used in our Stage II Extreme Engine Upgrades

$199.00

The world's smallest, wireless on-board video camera. They make easy in-car videos a reality. Use it to video your cruising, racing, or just to document the crazy things you do on YouTube.

$199.00

Let your superchargers and turbos breath cooler air with this new intercooler pump from MTI Racing

$135.00

These belt tensioner are a must for anyone doing any sort of performance driving with a Gen 3 / 4 powered car or truck.

$159.00

High volume performance upgrade for LS Engine. This oil pump provides more oil volume at a higher pressure relief setting.

$329.95

If you are looking for a better feel or just a better look a Momo steering wheel will conquer both.

$4 895.00

For the corvette owner who wants the absolute best performance on the track; a set of Moton coilovers is what you need.

$789.00

The MSD coils are great for cammed or supercharged applications. Big benefits are smoothing out the lower rpms, and increasing the throttle response off-idle.

$2 495.00

Looking for a custom shock set up? Look no further.

$119.00

These wires are custom made for MTI Racing by the supplier to IRL and Daytona Prototype cars. Perfect for street, show or track.

$3 995.00

To get the best ride quality for your corvette on the street or on the track a set of Penske coilovers are the best for both worlds.

$49.00

Lower your Corvette by using these specially designed bolts.

$600.00

Here is our famous MTI Racing "BIG RED" sway bars. These will increase you handling instantly!

$247.00

These versatile lightweight aluminum tanks from MTI Racing are suitable for any number of applications including; remote oil/water supply and coolant overflow/ recovery

$1 025.00

The Pfadt "Competition" sway bars are the stiffest bars on the planet, designed for serious track day performance. These are for drivers who want to go big or go home.

$2 000.00

The Pfadt Carbon Fiber drive shaft assembly weighs only 4.28 pounds! Saves almost 1/2 the weight of the factory parts. Comes with full Titanium hardware.

$219.95

C5/C6 Corvette Polyurethane Driveline Couplers

$39.00

MTI Racing Cue Ball Shift Knob fits the threaded Six Shooter Shifters fits the Six Shooter shifter for a 2010+ Camaro. The balls are 2" in diameter with 6-speed shift pattern.

$65.00

Delrin is a high-quality composite material that is ultra strong and can be machined to a precise tolerances. The Delrin material also resists heat, so the knob won't get hot in your hand. The MTI Racing Blackhawk shift knob is machined just like the grip

$194.00

In designing this shifter we started from scratch, re-examining the material selection for every component and how each piece interfaces in the assembly.

$200.00

A set of adjustable end links will let you (zero) out your sway bars to maximize your corvettes suspension capabilities.

$22.00

Show off your enthusiam with this great looking Corvette T Shirt. Comes in black 100% cotton with MTI Racing logo on front with a pair of awesome Corvettes on the back. The white Corvette is our World Challenge C5 Racecar that is still seen on racetracks

$40.00

fitting goes in place of your original oil filler cap for a trick street look and for race applications. It is designed to fit a -10AN fitting.

$79.99

This breather is equipped with a billet aluminum base with an o-ring for proper sealing as well as a chrome top piece with a fabric element. It spins on to the valve cover just like your stock oil filler cap.

$8.95

From the street to the track everyone knows the importance of stopping.