2010 Camaro
Racing
The staff at MTI Racing have over 25 years of road racing experience. We race what we sell, and sell what we race. We are passionate about it, and have helped many drivers live out their dreams on the racetrack.
We have compiled a list of products for you here that are specifically engineered towards RACING. We will assume, at this point, that you have basic upgrades. Although some of these products can be used on the street, the following products are engineered for those who want to go big or go home. Whether it’s the occasional track day or all-out competition car, let MTI Racing develop a plan for you.
So if you want top align yourself with a company that has proven experience, let MTI Racing work with you on an ongoing basis as we have with many customers to realize their driving or vehicle performance goals.
$3 695.00
The ultimate in braking for the ZO6 ! As used on the Southern Stingray.
|
$449.00
Brey-Krause R-1115 Harness Mount Bar for 1997-2004 C5 Corvette coupe or fixed roof.
|
$771.00
Brey-Krause R-1115 Harness Mount Bar for C6 and C6 Z06 Corvette coupe or fixed roof.
|
$499.00
This is the same rear spoiler that stabilized our record-setting Camaro at 182mph in the standing mile!! It provides real downforce and looks great! The rear spoiler is made in paintable composite, and fits the factory trunk with no modifications. Spoiler
|
$16.80
CM-45 ELEMENT Single 4-5/8" tall synthetic oil element for Canton 6" oil filters.
|
$995.00
Front Chin Spoiler for C6-Z06 is made from pure Carbon Fiber. A great way to dress up your C6-ZO6 and provide high-speed stability. Extends about 2" forward and 1" lower than factory valance, attaches using factory body clips.
|
$1 245.00
These hoods which are part of our new Supercharged LS7 Engine Upgrade. Can now be purchased as a separate add-on item for your C6 Coupe or C6-ZO6! This Extractor hood is available in either Clear Coated Carbon Fiber or Paintable Composite.
|
$1 295.00
Made from pure Carbon Fiber and developed in the wind tunnel for proven results. Can be used for both the street and track. Spoiler is 4" tall and uses the factory mounting location. Carbon Fiber piece comes in a clear coated finish and fiberglass piece i
|
$1 895.00
Front Splitter for C6-Z06 Models Only is made from pure Carbon Fiber and developed in the wind tunnel for proven results. Can be used for both the street and track. Extends about 1" lower and 2" forward than factory valance. Flat belly section covers 25"
|
$430.00
Cool Shirt® Personal Cooling Systems new Portable Bag System for racecar drivers is a new completely portable system. The Portable Bag System provides a driver cooling alternative for racecars that have limited space with no room for the standard hard coo
|
$99.99
This flexible crossover line replaces the hard factory tubing conviently located on the front of the vehicle for easy access. Not only is it functional, but it looks trick too!
|
$995.00
Rocker Covers fit all LS engines and uses LS7 coil bracket. For the ultimate look use MSD coil packs.
|
 The EV1R is a fully forged one piece mono-block wheel. Forged from 6061 T6 aerospace aluminum and then precision machined to exact specifications.
|
 Each wheel is built with true forged 6061 T6 centers, 6061 T6 spun rim halves, stainless steel fasteners (titanium fasteners and jet nuts are optional), and feature a powdercoated silver or gunmetal finish with a polished lip.
|
 The EV3R is the latest in Forgeline's competition designs. After extensive research and FEA design analysis, we have designed a wheel that is both lighter and stronger than any of our previous designs.
|
 The ZX3-R is a 10 spoke evolutionary design. Each spoke is tapered 10 degrees and extra machining is used to reduce weight even further than the original SX3-R design.
|
$219.99
The G-FORCE Racing Gear Modified Helmet is the enclosed cockpit racers dream. The outer contact shell is made from a low density, lightweight Z38 fiberglass, carbon Kevlar® composite blend.
|
 |
$2 150.00
For the ultimate street LS1/LS6 aluminum cylinder head, AFR's 205cc emission legal head are your only choice.
|
$2 295.00
For the maximum street/strip LS1/LS6 aluminum cylinder head AFR's all new 225cc, emission-legal head E/O #D250-4 is the best choice.
|
$2 795.00
The ultimate street / strip LS1/ LS6 cylinder head, MTI RACINGs 240cc for 4" Bore or larger. Fully CNC Ported and as used in our Stage II Extreme Engine Upgrades
|
$299.00
GoPro’s HD Motorsports HERO is the world’s highest performance 1080p HD on-board video and still photo camera. Professional quality 1080p, 960p, and 720p HD resolutions record at 30 frames per second (60 fps in 720p). The HD Motorsports HERO easily mount
|
$199.00
The world's smallest, wireless on-board video camera. They make easy in-car videos a reality. Use it to video your cruising, racing, or just to document the crazy things you do on YouTube.
|
 |
$199.00
Let your superchargers and turbos breath cooler air with this new intercooler pump from MTI Racing
|
$4 895.00
For the corvette owner who wants the absolute best performance on the track; a set of Moton coilovers is what you need.
|
$789.00
The MSD coils are great for cammed or supercharged applications. Big benefits are smoothing out the lower rpms, and increasing the throttle response off-idle.
|
$3 995.00
To get the best ride quality for your corvette on the street or on the track a set of Penske coilovers are the best for both worlds.
|
$600.00
Here is our famous MTI Racing "BIG RED" sway bars. These will increase you handling instantly!
|
$1 125.00
This is great for the street and necessary for track use. Offers smoother oil flow with larger lines, low restriction 8 micron filter, and larger cooler for lower oil temps. Adds approximately 1qt to oil capacity.
|
$247.00
These versatile lightweight aluminum tanks from MTI Racing are
suitable for any number of applications including;
remote oil/water supply and coolant overflow/ recovery
|
$290.00
This camber kit allows you to achieve the maximum negative camber and eliminates the eccentrics so that the the settings don't slip. You'll be able to get more negative camber with our kit than is possible with the stock set up.
|
$250.00
These Engine mounts reduce the massive powertrain shake (sometimes mistaken as wheel hop) that is common in the C6.
|
$1 025.00
The Pfadt "Competition" sway bars are the stiffest bars on the planet, designed for serious track day performance. These are for drivers who want to go big or go home.
|
$290.00
Hold the power train in place like never before with the uniquely designed Pfadt transmission brace. These mounts reduce the massive power train shake.
|
$2 000.00
The Pfadt Carbon Fiber drive shaft assembly weighs only 4.28 pounds! Saves almost 1/2 the weight of the factory parts. Comes with full Titanium hardware.
|
$125.00
The Pfadt C6 Front Tow Hook offers easy installation and durability for your track car. Lightweight and easy to install, this Tow Hook will help get you out of the toughest of situations. This tow hook is made in the USA of heavy duty steel and powder coa
|
$140.00
The Pfadt C6 Rear Tow Hook offers easy installation and durability for your track car. Lightweight and easy to install, this Tow Hook will help get you out of the toughest of situations. This tow hook is made in the USA of heavy duty steel and powder coat
|
$300.00
Mounting your race seat has never been easier! Your entire set up can be built on your work bench, then easily swapped with your stock seat.
|
$1 955.00
The MXL Pista model is one of the most powerful race data acquisition systems, used by automotive racers around the world. Powerful enough for world class GT cup cars and LeMans racers, yet easy to own and install. The MXL is the racing data aquisition sy
|
$1 450.00
Complete set of 4 Hoosier Tires R6 compound for a factory wheel set up. Great for Track Days! Front P295/30ZR-18 and Rear P345/30ZR-19
|
$1 390.00
Complete set of 4 Hoosier Tires R6 compound for a racing set up with 18" rims on front and rear. Fronts P315/30ZR-18 and Rears P335/30ZR-18
|
$1 195.00
The Micro Pod Sport is a flexible data acquisition system and color graphics touch screen in a single small package. A plug-n-play dash mounts anywhere using the suction cup mount. Plugs directly into the OBD-II.
|
$985.00
THE BEST RACE SEATS PERIOD. Racetech's Model 4009W is the answer to anyone who has a Sparco EVO L or 2 and wants to upgrade.
|
$355.00
This seat belt is great for track cars with it's light weight design and easy to use cam lock fixed point. It features the 2" Flexi Pull Down Lap Belt, the T-bar sub strap, and the HANS specific 2"/3" should belts.
|
$69.00
These sliders work perfectly with our Pfadt Seat Mount Kit and allow you to easily get in and out of your race seat. They're also ideal if two different drivers use the car and need to adjust the seat.
|
$194.00
In designing this shifter we started from scratch, re-examining the material selection for every component and how each piece interfaces in the assembly.
|
$40.00
fitting goes in place of your original oil filler cap for a trick street look and for race applications. It is designed to fit a -10AN fitting.
|
$79.99
This breather is equipped with a billet aluminum base with an o-ring for proper sealing as well as a chrome top piece with a fabric element. It spins on to the valve cover just like your stock oil filler cap.
|
- «« Start
- « Prev
- 1
- Next »
- End »»
Results 1 - 49 of 49
Recently Viewed Products
- Corsa Cat-Back Exhaust for Camaro (Category: 2010 Camaro)