5th Gen Camaro
New 2010/2011 Camaro Transmission / Driveline Parts
$995.00
Announcing our new Ceramic/Metallic Segmental Heavy Duty Clutch assembly for LS3 equipped cars. Featuring increased holding capacity, this heavy-duty assembly is designed as a direct bolt-in for perfect fit and function.
|
$2 195.00
The TORQUE CLAMP is a street and race clutch. Superior Street Twin-Disc design holds up to 900 lb/ft torque and feels near-stock. The same clutch that wins races also drives to the supermarket.
|
$60.00
MTI Racing's high impact Delrin shift knob is designed for the 2010 Camaro and Corvette Six Shooter Shifters by MTI Racing.
|
$129.99
This bolt-on driveshaft safety loop is designed exclusively for the 2010 and newer Camaro SS equipped with either the six-speed or automatic transmission.This driveshaft safety loop is an original Metco Motorsports design and no modifications to the vehic
|
$129.95
NHRA safety regulations requires a front driveshaft safety loop for any vehicle running faster than 12.99 in the quarter mile. The Fifth generation Camaro practically does that right off the showroom floor!
|
$699.00
Lingenfelter offers a premium ring & pinion gear set for the 2010-2011 Camaro SS that are designed and manufactured to meet OE specifications to ensure long life and quiet operation
|
$65.00
The Blackhawk Delrin shift knob is used in our World Challenge Racecar and the Delrin material also resists heat, so the knob won't get hot in your hand. The MTI Racing Blackhawk shift knob is machined just like the grip of your fingers.
|
$39.00
MTI Racing Cue Ball Shift Knob fits the threaded Six Shooter Shifters fits the Six Shooter shifter for a 2010+ Camaro. The balls are 2" in diameter with 6-speed shift pattern.
|
$389.00
Available for V6. This is the #1 upgrade for the 2010 Camaro. The MTI Racing by UUC Six Shooter Shifter is engineered with better materials, shorter throw, and a better overall feel. Now you can get rid of that stock numb, rubbery factory shifter and
|
$389.00
Available for V8. This is the #1 upgrade for the 2010 Camaro. The MTI Racing by UUC Six Shooter Shifter is engineered with better materials, shorter throw, and a better overall feel. Now you can get rid of that stock numb, rubbery factory shifter and
|
$199.00
The Original MTI Racing Six Shooter Shifter is a masterpiece of engineering and feel. This is a special version with great feel and quality that is packaged for "value".
|
$10.49
Our most popular and versatile ATF, D4 is suitable for use where Dexron III, Dexron II, or Mercon fluids are recommended.
|
$554.00
Take your 5th Gen Camaro to the next level of high performance with these ring and pinion sets from Richmond Gear
|
$22.99
Finish off your MTI Racing shifter install with this new Delrin jam nut for a clean finished look. This jam nut will keep your cue ball shift knob in it's place while maintaining the proper height of your shifter boot for a finished look in your Camaro's
|
$125.00
All Stainless Steel shift knob for your Corvette and 2010 Camaro.
|
Featured Products
MTI Racing shifter for 5th Gen Camaro V8
$389.00Available for V8. This is the #1 upgrade for the 2010 Camaro. The MTI Racing by UUC Six Shooter Shifter is engineered with better materials, shorter throw, and a better overall feel. Now you can get rid of that stock numb, rubbery factory shifter and
Recently Viewed Products
- Forgeline GA3R Wheel (Category: Wheels and Accessories)
- Forgeline ZX3R Wheel (Category: Wheels and Accessories)
- Forgeline ZX3P Wheel (Category: Wheels and Accessories)
- Forgeline ZX3 Street Wheel (Category: Wheels and Accessories)
- Forgeline WC3R Wheel (Category: Wheels and Accessories)
- Forgeline VR3P (Category: Wheels and Accessories)
