5th Gen Camaro
1998 / 2002 LS1 Camaro Firebird
Find 1998 / 2002 LS1 Camaro Firebird Parts by Category
All 1998 / 2002 LS1 Camaro Firebird Parts
$59.95
Low temp thermostat increases performance and helps your engine run cooler.
|
$22.00
Show off your enthusiam with this great looking Camaro T Shirt. Comes in black 100% cotton with MTI Racing logo on front with a pair of awesome Camaros on the back. The body lines of the Orange Camaro jump right out at you.
Available in S, L, XL, 2XL
|
$2 150.00
For the ultimate street LS1/LS6 aluminum cylinder head, AFR's 205cc emission legal head are your only choice.
|
$2 295.00
For the maximum street/strip LS1/LS6 aluminum cylinder head AFR's all new 225cc, emission-legal head E/O #D250-4 is the best choice.
|
$2 795.00
The ultimate street / strip LS1/ LS6 cylinder head, MTI RACINGs 240cc for 4" Bore or larger. Fully CNC Ported and as used in our Stage II Extreme Engine Upgrades
|
$329.00
|
$79.99
This breather is equipped with a billet aluminum base with an o-ring for proper sealing as well as a chrome top piece with a fabric element. It spins on to the valve cover just like your stock oil filler cap.
|
$795.00
These Valve Covers were made to clear the Jesel Rocker Arms as well as factory rocker arms...
|
$995.00
Rocker Covers fit all LS engines and uses LS7 coil bracket. For the ultimate look use MSD coil packs.
|
$39.99
Brake deeper, harder, and longer! Prospeed RS683 is a revolutionary new racing brake fluid that is suitable for Street cars and for full Racing Cars. 683° F dry boiling point.
|
$141.00
Carbotech brakes deliver longer brake pad and rotor life - up to four times longer than competitive brakes. We use custom compounds to match specific cars, driving styles and applications. From street use to the higher performance demands of track days, w
|
$675.00
$575.00 You Save: $100.00 H - Beam Rods. Set of 8. Designed and Produced with Engineering and Finishing advancements, CompStar connecting rods have what it takes to make your engine build trouble free and your finished product reliable.
|
$99.99
This flexible crossover line replaces the hard factory tubing conviently located on the front of the vehicle for easy access. Not only is it functional, but it looks trick too!
|
$320.00
MTI Racing and DMH Performance have teamed up to bring you the best electric cutouts available! This kit includes a pair of DMH electric cut out, and all the wiring needed to install. You have your choice of sizes from 2" to 4" inch exhaust.
|
$399.00
DMH Performance low-profile cutouts allow you to switch from stock exhaust to "open" exhaust for a big, throaty sound. This kit includes a pair of DMH Low Profile electric cut outs with all the wiring needed to install.
|
Featured Products
Compstar Connecting Rods
$675.00$575.00
You Save: $100.00
H - Beam Rods. Set of 8. Designed and Produced with Engineering and Finishing advancements, CompStar connecting rods have what it takes to make your engine build trouble free and your finished product reliable.
MSD Coils
$789.00$669.00
You Save: $120.00
The MSD coils are great for cammed or supercharged applications. Big benefits are smoothing out the lower rpms, and increasing the throttle response off-idle.
MTI RACING "Hot Spark" Heat Shield Race Plug Wires
$139.00$119.00
You Save: $20.00
These spark plug wires are custom made for MTI Racing by the supplier to IRL and Daytona Prototype cars. Perfect for street, show or track.
Melling High-Volume LSX Oil Pump 10296
$159.00$139.00
You Save: $20.00
High volume performance upgrade for LS Engine. This oil pump provides more oil volume at a higher pressure relief setting.
New MTI Racing Belt Tensioner for Corvette
$179.95$169.95
You Save: $10.00
The new MTI Racing belt tensioner is the BEST manual tensioner on the market.
Wilwood 570 High Temp Brake Fluid
$8.95
From the street to the track everyone knows the importance of stopping.
Last Updated: Tuesday, 22 May 2012 23:53
