 | ||||
 |  |  | ||
 | ||||
 | | | | |
MTI RACING has gone to great lengths to test and verify the products it sells. You can rely on the fact that it has been tested under the highest of standards and procedures.
We recently completed our second round of testing at the wind tunnel; and our aerodynamic package for the C6/ZO6 produced a reduction in drag by 30 counts. Plus increased downforce 39 lb. on the front / 25 lb. for the rear!
Please Note: The Splitter Is For C6-ZO6 Model Only!
Spoiler For C6 & C6-ZO6
Clearcoated / Carbon Fiber Chin Spoiler For The C6-ZO6
Additional $150 / For Installation
All Prices And Specifications Subject To Change Without Notice
Call Us At 770-919-7774 For Your next Upgrade!
Photo's and Video's courtesy of Art Maverick Studios
Copyright © 2008 MTI RACING.com
Made from pure Carbon Fiber and developed in the wind tunnel for proven results. Can be used for both the street and track. Extends about 1" lower and 2" forward than factory valance. Flat belly section covers 25" underneath car. Comes in clearcoated finish. We also offer the splitter with an upgraded forced air induction system for added cooling to the brake rotors. This feature was added as wind tunnel tests had proved the factory inlets to be non- functional.
Carbon Fiber Splitter Without Brake Duct Inlets
Carbon Fiber Splitter With Brake Duct Inlets
Carbon Fiber Splitter With Forced Air Induction (Heavy Duty Race fans)
Fiberglass Splitter (Not Painted)
Made from pure Carbon Fiber and developed in the wind tunnel for proven results. Can be used for both the street and track. When combined with our front splitter our aerodynamic package for the C6-ZO6 Corvette produced a reduction in drag by 30 counts, plus increased downforce 39 lb.. on the front and 25 lb.. in the rear. Spoiler is 4" tall and uses the factory mounting location. Carbon Fiber piece comes in clearcoated finish and fiberglass piece is not painted
Carbon Fiber Spoiler
Fiberglass Spoiler (Not Painted)
Made from pure Carbon Fiber. A great way to dress up your C6-ZO6. Extends about 2" forward and I" lower than factory valance, attaches using factory body clips.
Carbon Fiber Chin Spoiler
Clearcoated / Carbon Fiber - Hoods - For The C6-ZO6
These carbon fiber hoods which are part of our new Supercharged LS7 Engine Upgrade. Can now be purchased as a separate add-on item for your '06 / '08 C6-ZO6! This Is Not A In Stock Item. A larger production run for these items is taking place due to popular demand.
Ram Air Version
Extractor Version
These are special order items please call ahead for availability and the placing of your order.
As always we will be researching aerodynamic data on these and other upcoming "New" aero products in the near future. At MTI RACING its all about engineering for total performance!
C6-ZO6 Carbon Fiber ( Clear Coated Hoods )
C6-ZO6 Fiberglass ( Paintable Hoods )
