5th Gen Camaro
5th Gen Camaro Air / Fuel Intake Induction
$289.00
This hose relocation kit is awesome for cleaning up the engine bay of your 2010 Camaro. When you take off the stock engine cover the heater hoses, fuel lines and Evap lines will all be exposed making your engine bay look very cluttered and unorganized.
|
$750.00
2010 Camaro L99/LS3 Cold Air Induction/Tune Package
|
 |
$400.00
Get the most from your 2010 Camaro with MTI Racing professional Dyno Tune
|
$18.80
In order to properly clean and oil your SLP/Blackwing? filter you
should use this kit. This cleaning kit is designed specifically for
the speci
|
$49.95
This easy-to-install Blackwing? air filter is designed to fit all 2010 V8 and V6 Camaros, and is the same filter used in
our air-induction packages w
|
$350.00
The key to getting more efficiency out of the engine is to assist the airflow going into it. MTI Racing has developed a smooth elbow and filter assembly, allowing air to enter the engine faster, thus giving you more power.
|
$199.95
The power-enhancing technology of SLP's BLACKWING COLD-AIR INDUCTION PACKAGES were pioneered many years ago on SLP's third and
fourth generati
|
$199.95
The power-enhancing technology of SLP's BLACKWING COLD-AIR INDUCTION PACKAGES were pioneered many years ago on SLP's
third and fourth g
|
$429.95
The power-enhancing technology of SLP's BLACKWING COLD-AIR INDUCTION SYSTEMS were pioneered many years ago on SLP's third and fourth
ge
|
$949.00
Fits 2010 Camaro, LS3 Corvette. Testing on a stock LS3 engine with a Big Mouth 102mm Throttle Body™ produced gains of 14+ horsepower and 11+ ft/lbs of torque at the flywheel over the stock intake.
|
$79.00
This Mass Air Flow sensor adapter flange/bung is made from CNC'd billet aluminum and ready to install on your custom intake system. The curvature of the flange/bung allows it to be used on 2.5"-3.5" pipe and will be necessary when building custom intake
|
$48.99
This kit is easy to install and is absolutely necessary for applications using an adjustable fuel pressure regulator. The kit also adds a high performance look to any engine compartment. The kit includes (1) carbon fiber-faced, liquid-filled gauge and th
|
$789.00
$669.00 You Save: $120.00 The MSD coils are great for cammed or supercharged applications. Big benefits are smoothing out the lower rpms, and increasing the throttle response off-idle.
|
$139.00
$119.00 You Save: $20.00 These spark plug wires are custom made for MTI Racing by the supplier to IRL and Daytona Prototype cars. Perfect for street, show or track.
|
Featured Products
MSD Coils
$789.00$669.00
You Save: $120.00
The MSD coils are great for cammed or supercharged applications. Big benefits are smoothing out the lower rpms, and increasing the throttle response off-idle.
MTI RACING "Hot Spark" Heat Shield Race Plug Wires
$139.00$119.00
You Save: $20.00
These spark plug wires are custom made for MTI Racing by the supplier to IRL and Daytona Prototype cars. Perfect for street, show or track.
Recently Viewed Products
- MTI Racing Stainless Braided Brake Lines For 5th Gen Camaro (Category: New 2010/2011 Camaro Brake Parts)
- Camaro 2010+ Door Panel Kick Plates SS Brushed Stainless 2pc C (Category: Camaro 5th Gen Stainless and Chrome Interior Trim Accessories)
- Camaro 2010+ Factory Shroud Trim Polished Stainless V8 Kit 3pc (Category: New 2010/2011 Camaro Accessories)
- MTI Racing Stage 3 Camshaft - 2010 Camaro (Category: New 2010/2011 Camaro)
- MTI Racing Stage 1 Camshaft - 2010 Camaro (Category: New 2010/2011 Camaro)
- MTI Racing Rear Spoiler for 2010 Camaro (Category: New 2010/2011 Camaro)
