5th Gen Camaro
Corvette C6 Z06 Engine Components
$59.95
Low temp thermostat increases performance and helps your engine run cooler.
|
$329.00
|
$79.99
This breather is equipped with a billet aluminum base with an o-ring for proper sealing as well as a chrome top piece with a fabric element. It spins on to the valve cover just like your stock oil filler cap.
|
$795.00
These Valve Covers were made to clear the Jesel Rocker Arms as well as factory rocker arms...
|
$995.00
Rocker Covers fit all LS engines and uses LS7 coil bracket. For the ultimate look use MSD coil packs.
|
$225.00
Cloyes Timing Chain specifically for LS7 and LS3. Fits 2010 Camaro and LS3 Corvette.
|
$675.00
$575.00 You Save: $100.00 H - Beam Rods. Set of 8. Designed and Produced with Engineering and Finishing advancements, CompStar connecting rods have what it takes to make your engine build trouble free and your finished product reliable.
|
$99.99
This flexible crossover line replaces the hard factory tubing conviently located on the front of the vehicle for easy access. Not only is it functional, but it looks trick too!
|
$95.00
Specifically designed for breaking in engines and flat tappet camshafts and lifters, BR break-in oil provides high levels of Zinc, Phosphorus and Sulfur in a mineral base oil. BR protects flat-tappet camshafts and lifters during break-in and it provides e
|
$95.88
Joe Gibbs Driven Oil is formulated specifically for racing engines and older style flat-tappet engines. A recent camshaft company Technical Bulletin said it best, "Today's engine oil is just not the same as it used to be, thanks to the ever tightening env
|
$95.00
Joe Gibbs Driven Racing Oils are specially formulated for the specific needs of racing engines. Our engineers and engine builders at Joe Gibbs Racing have put in countless hours perfecting our oil to maximize horsepower and protect vital parts. Our petrol
|
$135.00
These belt tensioner are a must for anyone doing any sort of performance driving with a Gen 3 / 4 powered car or truck.
|
$159.99
The strongest single chain available. Direct replacement for LS engines. Never broken in all of C5R Corvette racing and durability testing.
|
$109.99
This is a great new product from MTI Racing for your dry sump oiling system.
|
$79.00
This Mass Air Flow sensor adapter flange/bung is made from CNC'd billet aluminum and ready to install on your custom intake system. The curvature of the flange/bung allows it to be used on 2.5"-3.5" pipe and will be necessary when building custom intake
|
Featured Products
Compstar Connecting Rods
$675.00$575.00
You Save: $100.00
H - Beam Rods. Set of 8. Designed and Produced with Engineering and Finishing advancements, CompStar connecting rods have what it takes to make your engine build trouble free and your finished product reliable.
MTI RACING "Hot Spark" Heat Shield Race Plug Wires
$139.00$119.00
You Save: $20.00
These spark plug wires are custom made for MTI Racing by the supplier to IRL and Daytona Prototype cars. Perfect for street, show or track.
MSD Coils
$789.00$669.00
You Save: $120.00
The MSD coils are great for cammed or supercharged applications. Big benefits are smoothing out the lower rpms, and increasing the throttle response off-idle.
New MTI Racing Belt Tensioner for Corvette
$179.95$169.95
You Save: $10.00
The new MTI Racing belt tensioner is the BEST manual tensioner on the market.
Last Updated: Monday, 21 May 2012 12:04
